4D Systems On Screen
Display Module with OSD RS-232 Base Board attached. Assembled and tested.
Case not supplied.
4D Systems designed
this product for an end user, and are now able to release it to the public.
This was a cash register monitoring system.
Ideally they would like to just sell the hardware, fully assembled and
provide all schematics/support etc so that users can write their own code
for their own applications. The OSD module is driven by a PIC16F876 + M35054
OSD chip.
If you have any questions on this product,
please put your questions to the Support
Mailing List and they will be answered there.
The OSD-RS232 base board will not work
on its own, you will also need the 4D-OSD module. We have advertised the
OSD-module and the OSD-RS232 base board seperately as some people design
their own base board for specific applications and they only need the OSD-module.
Please make sure you order the correct units from Dontronics. We don't
have these units in stock so please allow an extra few days for us to get
them.
atilla at 4dsystems.com.au if you have
any questions at all, as Dontronics isn't in a position to answer any technical
questions on this one.
Top View
4D Systems On Screen
Display Module. Assembled and tested.
Operational Screen Shots
PDF Files:
Contains schematics and data for both
the On Screen Display Module and the RS-232 Base
Board.
pdf/4D_OSD_RS232_BASE_PCB.pdf
pdf/4D_OSD_RS232_BASE_SCH.pdf
pdf/4D_OSD_SIMM_PCB.pdf
pdf/4D_OSD_SIMM_Sch.pdf
pdf/4d_OSD_M35054.pdf
4D Systems On Screen Display
_
