From leon_heller at hotmail.com Sat Dec 13 04:05:40 2003 From: leon_heller at hotmail.com (Leon Heller) Date: Fri Dec 12 23:05:40 2003 Subject: [SimmStick_Group] LPC2100 update Message-ID: I've formed a Yahoo Group for people interested in the Philips LPC2100 ARM MCU family: http://groups.yahoo.com/group/lpc2100/ It's proving very popular with over 100 members in a couple of weeks and lots of traffic. Here is a simple development board I've designed for the LPC210x: http://www.geocities.com/leon_heller/lpc2104.html Leon -- Leon Heller, G1HSM Email: aqzf13@dsl.pipex.com http://www.geocities.com/leon_heller From support2003 at dontronics.com Sun Dec 14 07:34:17 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Sat Dec 13 15:34:25 2003 Subject: [SimmStick_Group] Consultant needed for Atmel AVR Message-ID: <3FDB77C9.B0956359@dontronics.com> just spotted this one in comp.arch.embedded thought someome may be interested Don... ==================================== Subject: ANN: Consultant needed for Atmel AVR Date: Sat, 13 Dec 2003 19:25:23 GMT From: "James Musselman" Reply-To: "James Musselman" Organization: EarthLink Inc. -- http://www.EarthLink.net Newsgroups: comp.arch.embedded Hi, We have a requirement for a consultant to write some system level code for the Atmel atMega128. Duration of a few months. We are in San Diego, CA, USA. If interested reply via private email. Thanks -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Free Guide To Spam Reduction http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Tue Dec 16 11:21:47 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Mon Dec 15 19:21:57 2003 Subject: [SimmStick_Group] CyberCircuit Plus, is now shareware. Message-ID: <3FDE501B.BE4C27B4@dontronics.com> 16-Dec-2003 Damian Bonicatto, that author of CyberCircuit Plus, has made it shareware, so you can now download this package for free. http://www.dontronics.com/cc.html Saddam sprung with spam: http://www.e-dotcom.com/spam_exp.php Don... -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Free Guide To Spam Reduction http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From alxx at ihug.com.au Tue Dec 16 12:24:51 2003 From: alxx at ihug.com.au (Alex Gibson) Date: Mon Dec 15 21:07:27 2003 Subject: [SimmStick_Group] Analog devices dsp dev kits being discounted Message-ID: <00dd01c3c379$43db98f0$d684adcb@chaos> Don't know if anyone is interested. Analog devices have reduced the price of some of their dev kits for dsps. Look pretty good for the price Blackfin EZ-Kit Lite for US$99 Reference Code: BFWEB03 was up around US$250 http://www.analog.com/Analog_Root/static/promotions/BlackfinGO/index.html To Order a Blackfin EZ-Kit Lite for $99, please contact your local ADI Authorized Distributor. Use Reference Code: BFWEB03 (Expires 1/31/04) 600 MHz, 1.2 GMACS operation at 280mW comes out at around AUS$150 + p and h. (for guys in OZ memec are getting them in in 3 weeks just got a reply back from them) http://www.analog.com/processors/epProductPage/0,2542,BF533%252DHARDWARE,00. html http://tinyurl.com/zehj Attributes: -ADSP-BF533 Blackfin? Processor -32 MB (16M x 16-bit) SDRAM -2 MB (512K x 16-bit x 2) FLASH memory -AD1836 96 kHz audio codec w/ 4 input and 6 output RCA jacks -ADV7183 video decoder w/ 3 input RCA jacks -ADV7171 video encoder w/ 3 output RCA jacks -ADM3202 RS-232 line driver/receiver -DB9 male connector -USB-based debugger interface -JTAG ICE 14-pin header -SPORT0 connector -Evaluation suite of VisualDSP++ -10 LEDs: 1 power, 1 board reset, 1 USB reset, 1 USB monitor, 6 general purpose -5 push buttons w/ debounce logic: 1 reset, 4 programmable flag -Three 90-pin connectors providing PPI, SPI, EBIU, Timers0-2, UART, Programmable Flags, SPORT0, and SPORT1 expansion interfaces for analyzing and interfacing Alex From pach31 at yahoo.fr Tue Dec 16 15:17:08 2003 From: pach31 at yahoo.fr (=?iso-8859-1?q?jean-paul=20pach?=) Date: Tue Dec 16 09:17:13 2003 Subject: [SimmStick_Group] use of IC-prog to program PICs with the DT001 Message-ID: <20031216141708.37976.qmail@web40402.mail.yahoo.com> Hi, new to the list today, I didn't find any information regarding my request on the FAQ or other URL on www.dontronics.com or www.simmstick.com that's the reason why I ask my question to the list now Have some of you ever used the well-known IC-prog from Bonny Gijzen to program PIC with the DT001 if yes, could you give me the hardware configuration to set up in order to have a good programming I tried to program a 16F876 (with the use of the J1 10 pins header) but it was not ok. it would be great if someone could help me. regards, Jean-Paul France --------------------------------- Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en fran?ais ! Testez le nouveau Yahoo! Mail -------------- next part -------------- An HTML attachment was scrubbed... URL: http://helene.affordablehost.com/pipermail/simmstick_group_dontronics.com/attachments/20031216/9eff7c4e/attachment.htm From support2003 at dontronics.com Wed Dec 17 08:06:40 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Dec 16 16:06:46 2003 Subject: [SimmStick_Group] use of IC-prog to program PICs with the DT001 References: <20031216141708.37976.qmail@web40402.mail.yahoo.com> Message-ID: <3FDF73E0.AE95FC22@dontronics.com> jean-paul pach wrote: > > Hi, > > new to the list today, I didn't find any information regarding my > request on the FAQ or other URL on www.dontronics.com or > www.simmstick.com > > that's the reason why I ask my question to the list now > > Have some of you ever used the well-known IC-prog from Bonny Gijzen to > program PIC with the DT001 > > if yes, could you give me the hardware configuration to set up in > order to have a good programming down near the bottom of: http://www.dontronics.com/p16pro.html you will find a table that may assist Jean-Paul > I tried to program a 16F876 (with the use of the J1 10 pins header) > but it was not ok. we have a plug in board that may help. http://www.dontronics.com/dt106.html Cheers Don... > > it would be great if someone could help me. > > regards, > Jean-Paul > France -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Free Guide To Spam Reduction http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Wed Dec 31 10:27:36 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Dec 30 18:27:57 2003 Subject: [SimmStick_Group] contract programming done in BascomAVR? References: Message-ID: <3FF209E8.5A3C9D9D@dontronics.com> Andrew Erwood wrote: > > Message sent via http://www.e-dotcom.com/ecp.php?un=Dontronics > > Hi Don, > Thanks for sending my order through so quickly, your service is excellent!!! > > Do you have any contacts here in Australia, that I could get some contract programming done in BascomAVR? > Work is already starting to pile up for me this year, and I really need to get this particular project going, so I thought it would be much quicker if I paid someone else to do it for me. > > Best Regards > Andrew Erwood > Manager > A&K Engineering > Babinda QLD 4861 Hi Andrew, thanks. I have taken the liberty of posting your message to my SimmStick group, as I have found that this is the best approach for finding someone. If anyone is interested, I'll get them to chat directly to you. Don... -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Free Guide To Spam Reduction http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software