From support2003 at dontronics.com Sat Nov 1 06:41:14 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Fri Oct 31 14:41:25 2003 Subject: [SimmStick_Group] USBSIMM card Message-ID: <3FA2BADA.4AAD207C@dontronics.com> peposted, you should get this twice Alan. :-) alan4100 at comcast.net > Originally, I tried to post it at SimmStick_Group@Dontronics.com, but it would not locate the server although I am a subscriber to this group. > Instead, I am sending this to you. You may post it for me unless you want me to do it myself. Help. > > The posting is about my purchasing USBSIMM card 3 1/2" wide and 2" tall preassembled from JGED. Also I ordered DT003 backplane and DT203 boards from Dontronics. They were preassembled at JGED, too at higher cost. > > I understand that I can order bare boards from you, Dontronics and assemble them myself...cheaper..but I dont have experience. When the assembled boards > arrived here, I find it is hard to believe that they can be purchased bare > boards before I solder chips to the boards. For example, the legs of the > chips are too close for soldering. But somehow it is possible. I might be > interested in getting feedback from some of you. > > I am supposed to plug the USBSIMM with the attached boards into the USB of > my pc for Lights and Buttons Project by John Hyde in his book "Design By > Example". Hopefully, later I can put USBSIMM to work. > > Alan Hi Alan, are you talking about the chips on the dontronics boards or the ones on the USBSIMM? -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From alan4100 at comcast.net Sat Nov 1 15:10:37 2003 From: alan4100 at comcast.net (alan b) Date: Sat Nov 1 15:10:41 2003 Subject: [SimmStick_Group] USBSIMM card References: <3FA2BADA.4AAD207C@dontronics.com> Message-ID: <043701c3a0b4$37ba0080$19e52744@alancomputer> This time, I am now reposting it at SimmStick_Group. > > peposted, you should get this twice Alan. :-) did you get it twice Alan? Don, YES.. > I am currently talking about backplane dt003 and leds/switches dt203 from > Dontronics. I already have these boards but they are assembled first at > IGED. > > I ordered USBSIMM assembled from IGED. I dont know if I can buy bare board > USBSIMM from IGED. They are selling assembled, only, I believe. yes because it is considered too difficult for most people to build. > But for now, I am asking about Dontronics. One step at a time because it is > hard to believe that the chips can be soldered with any soldering kit. > Is it possible? my boards are easy. but I don't sell USBSIMM. so I'm a little confused as to where you are heading with the questions. I thought perhaps in the future, I may order about 10 bare boards (same part nbr) and assemble myself with chips from other manufacturers like JAMECO, DIGI-KEY, etc. Then do soldering, myself with no experience. But I realized it is lots smaller than I think. By now, you may know where I am heading with the questions. > Thanks for the re-posting. can you post yourself? Cheers Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software ----- Original Message ----- From: "Don McKenzie" To: Sent: Friday, October 31, 2003 2:41 PM Subject: [SimmStick_Group] USBSIMM card > > > peposted, you should get this twice Alan. :-) > > alan4100 at comcast.net > > > > > Originally, I tried to post it at SimmStick_Group@Dontronics.com, but it would not locate the server although I am a > subscriber to this group. > > Instead, I am sending this to you. You may post it for me unless you want me to do it myself. Help. > > > > The posting is about my purchasing USBSIMM card 3 1/2" wide and 2" tall preassembled from JGED. Also I ordered DT003 > backplane and DT203 boards from Dontronics. They were preassembled at > JGED, too at higher cost. > > > > I understand that I can order bare boards from you, Dontronics and assemble them myself...cheaper..but I dont have > experience. When the assembled boards > > arrived here, I find it is hard to believe that they can be purchased bare > > boards before I solder chips to the boards. For example, the legs of the > > chips are too close for soldering. But somehow it is possible. I might be > > interested in getting feedback from some of you. > > > > I am supposed to plug the USBSIMM with the attached boards into the USB of > > my pc for Lights and Buttons Project by John Hyde in his book "Design By > > Example". Hopefully, later I can put USBSIMM to work. > > > > Alan > > Hi Alan, are you talking about the chips on the dontronics boards or the > ones on the USBSIMM? > > > > -- > Don McKenzie E-mail: http://www.dontronics.com/e-mail.html > Home Page: http://www.dontronics.com > > USB to RS232 Converter that works http://www.dontronics.com/usb_232.html > The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software > > > _______________________________________________ > SimmStick_Group mailing list > SimmStick_Group@dontronics.com > http://dontronics.com/mailman/listinfo/simmstick_group_dontronics.com From support2003 at dontronics.com Tue Nov 4 07:56:04 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Mon Nov 3 15:56:26 2003 Subject: [SimmStick_Group] SimmStick Group Message-ID: <3FA6C0E4.431940B6@dontronics.com> CC: to SimmStick_Group@dontronics.com also FYI so if you get this message via SimmStick_Group@dontronics.com, then your subscription is fine. ============================================================== Hi Gang, (to the 12 members on BCC) you are all members of our SimmStick Group, and it may well be that the system bounced your email address, and unsubsribed you. As there are 12 of you today, I felt this could be an error, as I normally only ever get one or two a week unsubscribe. If this is an error, could you please re-subscribe by pointing your browser at: http://www.dontronics.com/mailman/listinfo/simmstick_group_dontronics.com and simply fill out your Name, Email address, and a Password. I would also appreciate it if you would let me know. Perhaps the setting I have for bounces is too harsh. Today, with so many companies stopping mail getting to recipients due to spam and viruses, we may all grind to a halt. 8 of the 12 email addresses on this list are yahoo addresses. Thanks in advance Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Tue Nov 4 08:14:14 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Mon Nov 3 16:14:28 2003 Subject: [SimmStick_Group] SimmStick Group References: <3FA6C0E4.431940B6@dontronics.com> Message-ID: <3FA6C526.DACB86D7@dontronics.com> Don McKenzie wrote: > you are all members of our SimmStick Group, and it may well be that the > system bounced your email address, and unsubsribed you. WOW! I should have sent test messages to the 12 members first before sending to this group. Each and everyone of them was a very hard bounce, which was sent back to me in a few minutes. Perhaps it is simply my bounce mechanism kicking in, after setting it up liberally as I did a month or two ago. Strange, 8 of the 12 are yahoo. This may simply mean users prefer a throw away address for lists. Not much wrong with that either. :-) Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Tue Nov 4 19:10:27 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Nov 4 03:10:44 2003 Subject: [SimmStick_Group] Re: Dontronics Technical - via contact page References: Message-ID: <3FA75EF3.ECA0C590@dontronics.com> Robert Lore wrote: > > We are looking to have some design done for us. We plan to use the Atmel ATMEGA chip and a Sony GSM modem. DO you or do you know any person or company who does hadrware and some software design ? > Regards, > Robert Hi Robert, I have posted this message to my SimmStick group, as this had brought good results in the past. Any member interested, please contact Robert directly at Robert Lore Cheers Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From andy-stephenson at btconnect.com Tue Nov 4 10:13:32 2003 From: andy-stephenson at btconnect.com (Andy Stephenson) Date: Tue Nov 4 05:10:18 2003 Subject: [SimmStick_Group] SimmStick Group References: <3FA6C0E4.431940B6@dontronics.com> <3FA6C526.DACB86D7@dontronics.com> Message-ID: <3FA77BCC.4020605@btconnect.com> Don, Bit confused here. Should I be doing something about this? Or can I assume I am OK since I got the mail (and the first post)? ...Andy Don McKenzie wrote: > Don McKenzie wrote: > >>you are all members of our SimmStick Group, and it may well be that the >>system bounced your email address, and unsubsribed you. > > > WOW! > > I should have sent test messages to the 12 members first before sending > to this group. > Each and everyone of them was a very hard bounce, which was sent back to > me in a few minutes. > > Perhaps it is simply my bounce mechanism kicking in, after setting it up > liberally as I did a month or two ago. > > Strange, 8 of the 12 are yahoo. This may simply mean users prefer a > throw away address for lists. > Not much wrong with that either. :-) > > Don... > -- ASA Micros Ltd. 21 Edmunds Fold, Littleborough, Lancs. OL15 9LS UK Tel: +44(0)1706 371695 Company No. 4722262 VAT No. 704044772 From support2003 at dontronics.com Wed Nov 5 08:20:09 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Nov 4 16:20:21 2003 Subject: [SimmStick_Group] SimmStick Group References: <3FA6C0E4.431940B6@dontronics.com> <3FA6C526.DACB86D7@dontronics.com> <3FA77BCC.4020605@btconnect.com> Message-ID: <3FA81809.34203EA4@dontronics.com> Andy Stephenson wrote: > > Don, > > Bit confused here. Should I be doing something about this? Or can I > assume I am OK since I got the mail (and the first post)? > > ...Andy Hi Andy, I think I was more confused than anybody when I saw 12 unsubscribes in one hit. All's fine if you are getting the messages from the list, which you are. I still have a problem with Alex Gibson's subscription, that I would dearly love to sort out. He is receiving messages, but can't post. Spam is making everyone put up severe protection shields. Since this swen thing, it has really turned ugly. I have to really think out everything I do when it comes to an email address these days. and while we are all here. two depressing reads about spam: http://www.bizreport.com/article.php?art_id=5395 http://www.spamhaus.org/news.lasso?article=10 I am starting to think that the net will grind to almost a halt, before people wake up, and finally legislate in a sensible way about spam. Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From alxx at ihug.com.au Fri Nov 7 12:45:19 2003 From: alxx at ihug.com.au (Alex Gibson) Date: Thu Nov 6 21:01:47 2003 Subject: [SimmStick_Group] test Message-ID: <00d501c3a4d3$3cce3eb0$2f84adcb@CHAOS1> test. Sorry to be a a pain. Just had hassles trying to reply to posts, even thgough was recieving them fine. Alex From support2003 at dontronics.com Fri Nov 7 13:31:01 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Thu Nov 6 21:31:15 2003 Subject: [SimmStick_Group] test References: <00d501c3a4d3$3cce3eb0$2f84adcb@CHAOS1> Message-ID: <3FAB03E5.76CF71E5@dontronics.com> Alex Gibson wrote: > > test. Sorry to be a a pain. > > Just had hassles trying to reply to posts, even > thgough was recieving them fine. > > Alex Hi Alex, good to see that you finally got there. You a pain? When I consider the amount of feedback and assistance you give to the group, you would be one of the last to be a pain. I have never seen anybody quote so many links, on so many micro related subjects, in such a short period of time. You may have seen Alex providing help on many Newsgroups in a similar fashion. A "real person on-line encyclopedia" already. Don... -- Don McKenzie E-mail: http://www.dontronics.com/e-mail.html Home Page: http://www.dontronics.com USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Tue Nov 11 17:35:25 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Nov 11 01:35:35 2003 Subject: [SimmStick_Group] Belkin Routers Message-ID: <3FB0832D.81B6D6FC@dontronics.com> I am just reading a thread in news.admin.net-abuse.email that I feel will be of interst to most readers of this group. Apparently if you purchase one of the latest Belkin Routers, and type in say google.com, it may well go to a web page with a Belkin advertisiment, as URL re-directs are a part of the internal structure of the device. The campers are not happy at all. Thread is growing quickly in a negative fashion. I'm sure we will hear more on this one, if the reports are true. The original poster appears to be a reporter from the Boston Globe. :-) Don... ================================================= Subject: That reporter again Date: Mon, 10 Nov 2003 19:33:20 +0000 (UTC) From: "Hiawatha Bray" Organization: Mailgate.ORG Server - http://www.Mailgate.ORG Newsgroups: news.admin.net-abuse.email Vernon Schryver suggested I post my message here. I'm looking for comments on the matter of Belkin routers that send their users to a advertising Web site without permission. Care to comment? Please reply ASAP. Thanks. Hiawatha Bray Technology Reporter Boston Globe P.O. Box 2378 135 Morrissey Blvd. Boston, MA 02107 USA 617-929-3119 voice 617-929-3183 fax bray@globe.com watha@monitortan.com Blog: www.monitortan.com -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From support2003 at dontronics.com Wed Nov 12 14:31:56 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Tue Nov 11 22:32:06 2003 Subject: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php Message-ID: <3FB1A9AC.D0F97DF0@dontronics.com> I have finally written up the readily accessible instructions, on the methods we use for spam prevention at dontronics.com I hope someone out there can make some use of it, or give me some feedback. http://www.e-dotcom.com/spam_exp.php Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From suemac at empire.net Wed Nov 12 12:45:16 2003 From: suemac at empire.net (Bob McIlvaine) Date: Wed Nov 12 12:45:29 2003 Subject: [SimmStick_Group] Spam info In-Reply-To: Message-ID: <3FB22B5C.7738.95172F@localhost> Don, Great info in the spam info you posted. For those who need client side spam help, I would suggest a look at http://www.pmail.com This is the home page of Pegasus, a FREE email package. It addresses a lot of the issues that Outlook and Outlook Express overlook. It has selective mail download and a variety of white/black list facilities and filters that the user can use to get rid of spam. Regards, Mac Bob "Mac" McIlvaine 36 Parker Rd. Brookline, NH 03033 Phone: 603-673-5861 e-mail: suemac@empire.net From andy-stephenson at btconnect.com Wed Nov 12 21:27:27 2003 From: andy-stephenson at btconnect.com (Andy Stephenson) Date: Wed Nov 12 16:27:26 2003 Subject: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php References: <3FB1A9AC.D0F97DF0@dontronics.com> Message-ID: <3FB2A5BF.8090609@btconnect.com> Don, I will definately have a play with this. It's about time I got php savvy. What could be a better excuse. ...Andy Don McKenzie wrote: > I have finally written up the readily accessible instructions, on the > methods we use for spam prevention at dontronics.com > > I hope someone out there can make some use of it, or give me some > feedback. > http://www.e-dotcom.com/spam_exp.php > > Don... > > > -- ASA Micros Ltd. 21 Edmunds Fold, Littleborough, Lancs. OL15 9LS UK Tel: +44(0)1706 371695 Company No. 4722262 VAT No. 704044772 From support2003 at dontronics.com Thu Nov 13 10:30:04 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Wed Nov 12 18:30:11 2003 Subject: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php References: <3FB1A9AC.D0F97DF0@dontronics.com> <3FB2A5BF.8090609@btconnect.com> Message-ID: <3FB2C27C.9341A8EF@dontronics.com> Andy Stephenson wrote: > > Don, > > I will definately have a play with this. It's about time I got php > savvy. What could be a better excuse. > > ...Andy sure Andy, every Internet business should be looking at similar methods right now, or they may get blown away. I have also decided to set up a full line up of email addresses. example: circuitcellar@dontronics.com for my on line subscriptions etc., so I don't have to chase up every address, every new year. also another interesting read on the Belkin Routers: http://www.globetechnology.com/servlet/story/RTGAM.20031110.gtbelkinnov10/BNStory/Technology/ Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From hendro at indovisual.co.id Thu Nov 13 15:17:28 2003 From: hendro at indovisual.co.id (Hendro) Date: Thu Nov 13 03:13:03 2003 Subject: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php In-Reply-To: <3FB2C27C.9341A8EF@dontronics.com> Message-ID: Hendro Apriyanto IT Engineer & Product Specialist IndoVisual Presentatama, PT Email : hendro@Indovisual.co.id Mobile : +62 815 812 0494 Office : +62 21 634 6388 Fax : +62 21 634 6387 Website : www.indovisual.co.id -----Original Message----- From: SimmStick_Group-bounces@dontronics.com [mailto:SimmStick_Group-bounces@dontronics.com]On Behalf Of Don McKenzie Sent: 13 Nopember 2003 06:30 To: SimmStick Group Subject: Re: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php Andy Stephenson wrote: > > Don, > > I will definately have a play with this. It's about time I got php > savvy. What could be a better excuse. > > ...Andy sure Andy, every Internet business should be looking at similar methods right now, or they may get blown away. I have also decided to set up a full line up of email addresses. example: circuitcellar@dontronics.com for my on line subscriptions etc., so I don't have to chase up every address, every new year. also another interesting read on the Belkin Routers: http://www.globetechnology.com/servlet/story/RTGAM.20031110.gtbelkinnov10/BN Story/Technology/ Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software _______________________________________________ SimmStick_Group mailing list SimmStick_Group@dontronics.com http://dontronics.com/mailman/listinfo/simmstick_group_dontronics.com From support2003 at dontronics.com Thu Nov 13 19:21:16 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Thu Nov 13 03:21:24 2003 Subject: [SimmStick_Group] http://www.e-dotcom.com/spam_exp.php References: Message-ID: <3FB33EFC.6DAEF9A8@dontronics.com> Hendro wrote: > > Hendro Apriyanto > IT Engineer & Product Specialist > IndoVisual Presentatama, PT > Email : hendro@Indovisual.co.id > Mobile : +62 815 812 0494 > Office : +62 21 634 6388 > Fax : +62 21 634 6387 > Website : www.indovisual.co.id Hi Hendro, It appears you posted a message without any content. can we help you with anything? Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From alxx at ihug.com.au Thu Nov 13 19:28:40 2003 From: alxx at ihug.com.au (Alex Gibson) Date: Thu Nov 13 03:27:31 2003 Subject: [SimmStick_Group] Spam info In-Reply-To: <3FB22B5C.7738.95172F@localhost> References: <3FB22B5C.7738.95172F@localhost> Message-ID: <3FB340B8.1010300@ihug.com.au> Bob McIlvaine wrote: >Don, > >Great info in the spam info you posted. > >For those who need client side spam help, I would suggest a look at >http://www.pmail.com > >This is the home page of Pegasus, a FREE email package. > >It addresses a lot of the issues that Outlook and Outlook Express overlook. > >It has selective mail download and a variety of white/black list facilities and >filters that the user can use to get rid of spam. > >Regards, >Mac > > > You should have a look at thunderbird. Part of the mozilla project. http://www.mozilla.org/projects/thunderbird/ standalone version of the mozilla mail reader. If you have never tried a tabbed browser you don't know what your missing. For a tabbed web browser either mozilla or firebird firebird is a light weightversion http://www.mozilla.org/ http://www.mozilla.org/releases/#1.5 http://www.mozilla.org/products/firebird/ If you do try one of them make sure to download and install the addons like adblock, flashclick(prevents flash ads etc from running until you click on them and the many others. Alex From support2003 at dontronics.com Tue Nov 18 07:46:25 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Mon Nov 17 15:46:28 2003 Subject: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar Message-ID: <3FB933A1.9C0C0439@dontronics.com> Hi Gang, you may recall I posted a message recently to this group. An old friend of mine wanted some assistance with a video project. Ingmar Meins responded and this is the result: http://www.dontronics.com/dt108.html#ingmar -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From shibupmt at emirates.net.ae Tue Nov 18 01:43:18 2003 From: shibupmt at emirates.net.ae (Shibu) Date: Mon Nov 17 16:43:49 2003 Subject: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar In-Reply-To: <3FB933A1.9C0C0439@dontronics.com> References: <3FB933A1.9C0C0439@dontronics.com> Message-ID: Hi Don is it possible to sell DT108 with OSD chip soldered Shibu On Tue, 18 Nov 2003 07:46:25 +1100, Don McKenzie wrote: > > Hi Gang, > > you may recall I posted a message recently to this group. An old friend > of mine wanted some assistance with a video project. > > Ingmar Meins responded and this is the result: > http://www.dontronics.com/dt108.html#ingmar > > -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ From support2003 at dontronics.com Tue Nov 18 09:35:34 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Mon Nov 17 17:35:40 2003 Subject: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar References: <3FB933A1.9C0C0439@dontronics.com> Message-ID: <3FB94D36.D6359806@dontronics.com> Shibu wrote: > > Hi Don > is it possible to sell DT108 with OSD chip soldered > Hi Shibu, sorry, no I have no means of doing it here. I don't know if any members can help or advise with this task. Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From tparker at netspace.net.au Tue Nov 18 13:22:27 2003 From: tparker at netspace.net.au (tparker@netspace.net.au) Date: Mon Nov 17 21:22:28 2003 Subject: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar Message-ID: <1069122147.3fb982636cf65@webmail.netspace.net.au> Shibu, > > Hi Don > > is it possible to sell DT108 with OSD chip soldered > > Hi Shibu, > > sorry, no I have no means of doing it here. > I don't know if any members can help or advise with this task. I can possibly help you here. The problem is that there is no way of testing the chip without assembling the complete board. If you are prepared to take the risk I would do it for the cost of the postage. I'm in the same city as Don so it might not cost too much extra in postage. Cheers, Tom ------------------------------------------------------------ This email was sent from Netspace Webmail: http://www.netspace.net.au From david at armour.fsnet.co.uk Thu Nov 20 21:49:57 2003 From: david at armour.fsnet.co.uk (David Armour) Date: Thu Nov 20 16:49:45 2003 Subject: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar In-Reply-To: <3FB94D36.D6359806@dontronics.com> Message-ID: Please remove me from this list -----Original Message----- From: SimmStick_Group-bounces@dontronics.com [mailto:SimmStick_Group-bounces@dontronics.com]On Behalf Of Don McKenzie Sent: 17 November 2003 22:36 To: SimmStick Group Subject: Re: [SimmStick_Group] http://www.dontronics.com/dt108.html#ingmar Shibu wrote: > > Hi Don > is it possible to sell DT108 with OSD chip soldered > Hi Shibu, sorry, no I have no means of doing it here. I don't know if any members can help or advise with this task. Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software _______________________________________________ SimmStick_Group mailing list SimmStick_Group@dontronics.com http://dontronics.com/mailman/listinfo/simmstick_group_dontronics.com From support2003 at dontronics.com Mon Nov 24 10:53:14 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Sun Nov 23 18:53:27 2003 Subject: [SimmStick_Group] http://www.j-walk.com/other/wifispray/ Message-ID: <3FC1486A.995BA99A@dontronics.com> Here is a product that I'm sure we can't live without :-) http://www.j-walk.com/other/wifispray/ make sure you click on order also. Don... -- Don McKenzie E-Mail Contact Page (ecp): http://www.e-dotcom.com/ecp.php?un=Dontronics USB to RS232 Converter that works http://www.dontronics.com/usb_232.html The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From Digitaldatafactory at centurytel.net Sun Nov 23 18:45:16 2003 From: Digitaldatafactory at centurytel.net (Edward Williams) Date: Sun Nov 23 19:45:15 2003 Subject: [SimmStick_Group] http://www.j-walk.com/other/wifispray/ In-Reply-To: <3FC1486A.995BA99A@dontronics.com> Message-ID: <7873020C-1E17-11D8-B355-003065E02D6A@centurytel.net> Thats just too funny Don where did ya find that Thanks Ed On Sunday, November 23, 2003, at 05:53 PM, Don McKenzie wrote: > > Here is a product that I'm sure we can't live without :-) > > http://www.j-walk.com/other/wifispray/ > make sure you click on order also. > > Don... > > > -- > Don McKenzie > E-Mail Contact Page (ecp): > http://www.e-dotcom.com/ecp.php?un=Dontronics > > USB to RS232 Converter that works > http://www.dontronics.com/usb_232.html > The World's Largest Range of Atmel/AVR & PICmicro Hardware and > Software > > > _______________________________________________ > SimmStick_Group mailing list > SimmStick_Group@dontronics.com > http://dontronics.com/mailman/listinfo/simmstick_group_dontronics.com > From support2003 at dontronics.com Mon Nov 24 11:49:57 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Sun Nov 23 19:50:08 2003 Subject: [SimmStick_Group] http://www.j-walk.com/other/wifispray/ References: <7873020C-1E17-11D8-B355-003065E02D6A@centurytel.net> Message-ID: <3FC155B5.D80410D4@dontronics.com> Edward Williams wrote: > > Thats just too funny Don where did ya find that > Thanks > Ed reading NANAE newsgroup. they have a heap of them. someones put in a lot of work. here is another http://www.j-walk.com/other/conf/index.htm I thought the readers of this group would enjoy the wifi spray however :-) Don... -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Guide To Spam Reduction: http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software From mcekim2 at earthlink.net Sun Nov 23 17:02:44 2003 From: mcekim2 at earthlink.net (Michael McCumber) Date: Sun Nov 23 20:02:33 2003 Subject: [SimmStick_Group] Newbie... Message-ID: <001301c3b226$af30acd0$963e79a5@mikezmnia5kfu7> I'm new to microcontrollers in general and more specifically, SimmStick. I have a Stamp Stick 2SX and now need to know the best board(s) available to use as a programming platform/design board. I have a large breadboard and would like to use that if possible. Also, possibly some suggestions re: books or websites for getting the "basics" would be very helpful. Any help/guidence would be appreciated. By the way -- great group! Thanks, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://helene.affordablehost.com/pipermail/simmstick_group_dontronics.com/attachments/20031123/958b648f/attachment.htm From support2003 at dontronics.com Mon Nov 24 12:21:44 2003 From: support2003 at dontronics.com (Don McKenzie) Date: Sun Nov 23 20:21:57 2003 Subject: [SimmStick_Group] Newbie... References: <001301c3b226$af30acd0$963e79a5@mikezmnia5kfu7> Message-ID: <3FC15D28.E45C93C6@dontronics.com> > Michael McCumber wrote: > > I'm new to microcontrollers in general and more specifically, SimmStick. I have a Stamp Stick 2SX and now need to know the best board(s) available to use as a programming platform/design board. I have a large breadboard and would like to use that if possible. Also, possibly some suggestions re: books or websites for getting the "basics" would be very helpful. Any help/guidence would be appreciated. By the way -- great group! > > Thanks, > > Mike Hi Mike, as I said in private email to you, the best bet is to join the Parallax Stamp group, which I feel you have mis-read as this group. http://groups.yahoo.com/group/basicstamps/ is where they are at. Cheers Don... -- Don McKenzie E-Mail Contact Page: http://www.e-dotcom.com/ecp.php?un=Dontronics Don's Guide To Spam Reduction: http://www.e-dotcom.com/spam_exp.php The World's Largest Range of Atmel/AVR & PICmicro Hardware and Software