From support2005 at dontronics.com  Mon Jul  4 00:19:13 2005
From: support2005 at dontronics.com (Don McKenzie)
Date: Mon Jul  4 00:19:40 2005
Subject: [SimmStick_Group] DT108 and the STV5730A chips 
Message-ID: <42C8B8C1.2010702@dontronics.com>


Hi Jonathan,

as I said, I didn't have anything to do with the development of this
board, but I was thinking, as I had sold many, perhaps if you wanted, I
could put a message on my simmstick group asking for anyone that has had
experinece with them and AVR's to contact you.
Don...
============================

Jonathan (details below) is interested in contacting someone who has had 
experience with the DT108 and the STV5730A chips and AVR's.

His project may involve a production run of 500, so if anyone is in a position 
to assist with software development, please contact Jonathan directly.

The usual suspects on DT108 development seem to have gone M.I.A.

Don...


Jonathan Nguyen
Austek Security Solutions
Unit 29
45-51 Huntley St
Alexandria  NSW 2015
AUSTRALIA
----------------------------------
PHONE: 1300 656 756
FAX:   02 9550 6611
EMAIL: jonathan@austeksecurity.com.au


-- 
Don McKenzie
E-Mail Contact Page:       http://www.e-dotcom.com/ecp.php?un=Dontronics

RS-232 to VGA. Many resolutions http://www.dontronics.com/micro-vga.html
USB to RS232 Converter that works http://www.dontronics.com/usb_232.html






From support2005 at dontronics.com  Tue Jul  5 01:18:18 2005
From: support2005 at dontronics.com (Don McKenzie)
Date: Tue Jul  5 01:18:46 2005
Subject: [SimmStick_Group] Tech help with basic stamp 2
Message-ID: <42CA181A.4090107@dontronics.com>


Posted with Kurt's permission, please contact him directly if you can assist.

Don...

===========================================

Kurt Snider at (kurt@radioremote.com)  seeking tech with BS2 (serial data 
)experience we are a small Co. in Mid Michigan USA

Thank, Kurt

-- 
Don McKenzie
E-Mail Contact Page:       http://www.e-dotcom.com/ecp.php?un=Dontronics

RS-232 to VGA. Many resolutions http://www.dontronics.com/micro-vga.html
USB to RS232 Converter that works http://www.dontronics.com/usb_232.html






From john.craddock at xitech.com.au  Tue Jul 12 06:47:08 2005
From: john.craddock at xitech.com.au (John Craddock)
Date: Tue Jul 12 06:47:16 2005
Subject: [SimmStick_Group] Simstick archives
Message-ID: <1AAB041E53A631468FD049F217BFEFB001B619@server.office.xitech.com.au>


Hello all,
Can anyone tell me how to get to the mailing list archives of the SimStick Group. I am having some weird problems programming and running a F877 in a DT001/DT106 setup. There are references to similar issues on web pages I have saved that refer to earlier discussions that I wish to browse before raising the issue in the forum.
Thanks for any help.
Regards
John C

From support2005 at dontronics.com  Tue Jul 12 15:25:26 2005
From: support2005 at dontronics.com (Don McKenzie)
Date: Tue Jul 12 15:25:50 2005
Subject: [SimmStick_Group] Simstick archives
In-Reply-To: <1AAB041E53A631468FD049F217BFEFB001B619@server.office.xitech.com.au>
References: <1AAB041E53A631468FD049F217BFEFB001B619@server.office.xitech.com.au>
Message-ID: <42D41926.3050004@dontronics.com>

John Craddock wrote:

> Hello all, Can anyone tell me how to get to the mailing list archives of the
> SimStick Group. I am having some weird problems programming and running a
> F877 in a DT001/DT106 setup. There are references to similar issues on web
> pages I have saved that refer to earlier discussions that I wish to browse
> before raising the issue in the forum. Thanks for any help. Regards John C

> http://dontronics.com/mailman/listinfo/simmstick_group_dontronics.com

Hi John,

if you click on the link above, it will take you there.

old achives and new archives are linked from:
http://www.dontronics.com/simmstick_group.html

Cheers Don...



-- 
Don McKenzie
E-Mail Contact Page:       http://www.e-dotcom.com/ecp.php?un=Dontronics

RS-232 to VGA. Many resolutions http://www.dontronics.com/micro-vga.html
USB to RS232 Converter that works http://www.dontronics.com/usb_232.html





From support2005 at dontronics.com  Sun Jul 17 19:26:33 2005
From: support2005 at dontronics.com (Don McKenzie)
Date: Sun Jul 17 19:26:54 2005
Subject: [SimmStick_Group] Don away for a week.
Message-ID: <42DAE929.1050407@dontronics.com>


Just to keep everyone up to date,
http://www.dontronics.com/closed_advice.html
(my wife Cheryl's 60th birthday :-))

Don...


-- 
Don McKenzie
E-Mail Contact Page:       http://www.e-dotcom.com/ecp.php?un=Dontronics

RS-232 to VGA. Many resolutions http://www.dontronics.com/micro-vga.html
USB to RS232 Converter that works http://www.dontronics.com/usb_232.html